Caring For Your Wallpaper Mural
Wall murals and wallpaper from Murals Your Way will last 20 years and longer, bringing beautiful décor, style and energy to your home or office room. We print on high quality, durable materials. All of our murals are printed with fade resistant inks, so proper care and maintenance will extend the life of the wall covering to help maintain its original finish. You won't need to exert a lot of energy to care for your mural over the years.
Please see the specific care instructions for each material listed below.
Caring For Your Vinyl HD - Texture, Eco Bella - Texture And Prepasted Wallpaper Murals
Ordinary dirt spots may be removed with a mild soap and warm water. Clean from the bottom of the wall upward to protect the baseboard and prevent streaking. Rinse thoroughly with clean water from the top down using a sponge. Blot wall covering dry with a soft, lint-free towel. For more difficult stains that are only surface deep, the use of a stronger detergent is recommended. Try a small subtle spot first before attempting the entire wall.
Not recommended for cleaning the wall covering are abrasive cleaners as they may mar the surface. Do not use active solvent based cleaning agents, lacquer thinners, nail polish remover, or pine oil as they may remove print and/or finish from the wall covering. Cleaning agents containing a bleach solution may be used in the cleaning of Eco Bella wall covering without damage.
For added protection and even easier care and maintenance, add Protective Topcoat to your mural at the time of purchase.
Caring for Your SmartStick Wallpaper Mural
SmartStick® wall covering may be cleaned with a dry, soft, lint-free cloth using a blotting action (do not rub).
Do not use any liquids to clean the mural as they may cause discoloration and/or remove ink from surface. Water, solvent based cleaning agents, lacquer thinners, nail polish remover, pine oil, or cleaning agents containing bleach should not be used on SmartStick® wall covering.
Caring For Your VersaGrip Wall Mural
As with any quality indoor/outdoor surface material, proper care and maintenance will extend the life and help maintain its original finish.
When cleaning VersaGrip, use a mild soap and water, starting in the middle and work your way out. (Cleaning from the edges toward the middle of the product may damage the adhesive properties of the product.)
Note: If power washing, use low pressure and keep at least 3-1/2 ft. away from the product.
Not recommended for cleaning the material are abrasive cleaners as they may mar the surface. Do not use active solvent based cleaning agents, lacquer thinners, nail polish remover, pine oil or cleaning agents containing bleach as they will remove print and/or finish from the material.
Caring For Your Frosted Window Film
Ordinary dirt spots may be removed with standard window cleaners or a mild soap and warm water. Always wipe and clean the material from the center out as to not catch and damage the edges and corners of the material. Try a small subtle spot first before attempting the entire window.
Not recommended for cleaning Frosted Window Film are abrasive cleaners as they may mar the surface. Do not use active solvent based cleaning agents, lacquer thinners, nail polish remover, or pine oil as they may remove print and/or finish.
Care & Maintenance Documents
Care instructions for materials available on our website:
Care instructions for additional materials available through our Sales Team: